Advantages
1.For the long distance from the factory to the working place.
As this machine has the guiding, and the length can be customed.So you can load the steel coil on the loading car ,and use the romote control ,making the loading car go forward till to arrive the support arm.
Then you can control the loading car up or down ,make the coil into the support arm.
2.For the heavy coil.
When the coil is very heavy,it is hard for people manual loading and transmission,this type decoiler is full automatic machine.
3.This machine has the pressing arm.
It can help you press the coil when machine work. When the material goes to very thick, the raw material is easy to peel off. The pressing arm is conrolled by the Pneumatic device. It needs air pressor. It work like
an arm, it can help you hold the coil tightly.
4.Having the emergency brake
It can make the process of the coil going forward stop emergency,when there is some material accumulation.
ydraulic entry coil car
| Capacity:10 T or customized |
Driving motor power:4KW | |
The stroke of the coil car is 300 mm | |
It is driven vertically by hydraulic cylinder with strong guide pillars. | |
The car can move levelly and vertically, which is convenient for putting the steel coils into the decoiler. | |
Function: It is used to lift up and down, move forward and back to make it easy to load the coils on decoiler. Hydraulic controls lifting, motor drives moving. The car is controlled on the auxiliary control panel. Its moving speed is 6-7 m/min. When the coils on decoiler, the car will return back to the start position. It can also carry back the unfinished coils from decoiler. | |
Hydraulic decoiler | Supporting the coils and doing uncoiling. The capacity is 10 Tons(max). |
This is the core part of the decoiler. It has four fan parts, By adjusting the fan expansion or not, we can finish loading coil to big or small part. | |
It adopts the hydraulic oil cylinder to make the decoiler expandable and fit to the inner diameter of coils. It is equipped with the cantilever. | |
Transmission part in external frame, the motor, reducer through the 3 chain driven reel spindle rotation, and also achieve positive and negative uncoiling and coiling. | |
Position roller at back, this shaft or roll is used for positioning the coil and make it steady when it works. Meanwhile it also fixes coil in case of loosing. | |
Carrying capacity: 10 tons Max coil width: 1300 mm ID: 450-650-mm | |
This machine is a single cantilever hydraulic expansion type uncoiled, the spindle part, transmission part, support the composition | |
The decoiler is equipped with the brake system |
Gear box, PLC, Hydraulic Motor,Coiled car,