From the Metal Profile Roll Forming Machine Factory, I understand that for the roll forming machine, because it is a product of the mechanical equipment category, it is used in the same way as other ordinary types of mechanical equipment in the process of use. For lubrication. However, we need to pay attention to that, in order to have a good lubricating effect, the Cold Roll Forming Machine Manufacturer recommends that employees must meet the following conditions in the lubrication of the roll forming machine:
1. During the process of lubricating the roll forming machine, employees must lubricate and lubricate according to the lubricated parts, lubrication points and checkpoints specified on the lubrication chart. Do not refuel and change oil at will.
2. The lubricating oil used to lubricate the roll forming machine must be inspected and meet the national standards, and the oil used in each part and each lubricating point must comply with the provisions on the lubrication chart.
3. When lubricating the roll forming machine, be sure to carry out daily lubrication of each lubricating part according to the amount of oil and grease specified on the lubrication card, do a good job of adding oil, refueling and oil tank cleaning, quantity control when changing oil or Recover waste oil and do a good job in leak control of equipment.
In addition to the above-mentioned aspects, the lubrication of the roll forming machine needs to meet more other conditions, so that it can better guarantee the use effect in practical applications.