The steel produced by the roll forming machine belongs to the economic section and high-efficiency steel, which saves costs. It is widely used in cold-formed steel to replace hot-rolled profiles and other varieties. Progress efficiency.
The working principle of the roll forming machine is that the gantry bracket in the auxiliary system is placed in the center of the two active rollers, and then the hydraulic system is followed so that the hydraulic cylinder will push the dovetail groove and the cold bending roller for cold pressing. In this process, when the desired arc is reached, the hydraulic system can be turned off.
After the commissioning is completed, anti-rust oil is often applied to the sliding side of the cold bending machine to prevent the equipment from rusting, especially when the equipment is not used for a long time, this operation should be carried out, and the generator must not be started when the oil tank is free of oil To prevent damage to the machine itself.
With the social development process, the roll forming production line pursues high automation and high efficiency, and pursues that all production processes can be completed on one production line as much as possible. According to different workpieces produced, the process flow is also different. The following Door Roll Forming Machine Supplier will introduce to you the processes used in the general roll forming production line, and how they are applied to the production of different workpieces.
Downspout Roll Forming Machine Taking with Elbow Machine
The roll forming machine has Wall Angle Roll Forming Machine and a Downspout roll forming machine takes. The processes commonly used in the roll forming line are: cutting, punching, forming, straightening, cutting, flanging and cutting, Embossing, bending, rounding, marking, buckle, gluing, welding, painting, foaming, packing, etc. For different workpieces, several processes will be applied together to make an automatic roll forming production line.
The roll forming machine production factory will manufacture equipment with different degrees of automation according to the production requirements of the workpiece and the needs of customers. The more process flow required by the equipment, the higher the manufacturing cost, and the longer the production cycle, therefore, customers should consider their own financial tolerance when customizing the equipment. In the future production and maintenance of the equipment, can the personnel they provide guarantee the equipment Normal operation.
If the capital budget is insufficient, or the staffing is not complete, it is recommended that some production processes be applied to multiple production processes and processed separately.
